Control Chief TM6000 Manuel de l'opérateur télécharger pdf (Page 82)

TM 10-3930-660-10

0006 00-12

OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED 0006 00

EMERGENCY BOOM OPERATIONS - CONTINUED

e. Disconnect the output line from the emergency steer pump from the priority valve tee. Install a cap at the priority

valve tee connection.

f. Connect the union end of the tow hose to the emergency steer pump hose that was disconnected in step e.

g. Disconnect the rod end hose of the boom extend cylinder from the main control valve (bottom middle port). Install a

#12 cap on the main control valve fitting.

h. Connect the tee end of the tow hose to the boom extend cylinder rod hose that was disconnected in step g.

i. Operate the emergency steering pump by turning the starter-run control switch and the emergency steer switch to the

ON position.

BOOM EXTEND

BOOM CONTROL

VALVE

CYLINDER

EMERGENCY

STEER PUMP

PRIORITY

VALVE

CAP

HOSE ASSEMBLY FROM

LIFT/RETRACT KIT

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 200 201

Pas de commentaire

Control Chief TM6000 Manuel de l'opérateur Page 82